Air compressor filter function
2021-04-09
The filter of air compressor adopts pre complete set configuration, which only needs single power connection and compressed air connection, and has built-in cooling system, which greatly simplifies the installation work. Air compressor filter with its high efficiency, high efficiency, maintenance free, highly reliable and other advantages, always provide high quality compressed air for all walks of life. The screw compression components in the air compressor filter are manufactured by the latest CNC grinding machine, together with online laser technology, to ensure the accuracy of manufacturing tolerance. Its reliability and performance can ensure that the operating cost of the compressor has been extremely low during its service life. Adjustment compressor, integrated compressor and desiccant series are new products in the series of compressors.
Air compressor filter screw air compressor uses high capacity compression components, its rotor outer circle speed is low and achieves the best oil injection, which realizes high efficiency and high reliability. Mingyuan Kaide's latest design ensures extremely low system temperature and compressed air temperature. Ensure that all parts have the best cooling effect and maximum service life.
Maintenance free, highly reliable and efficient driving concept
The air compressor filter screw air compressor drives the compression assembly at the optimum speed for the purpose through an efficient drive system. No maintenance is required during normal operation.
Low maintenance cost
Air compressor equipment screw air compressor original compressor design saves unnecessary maintenance costs. All parts are designed with long life. Large size inlet filter, oil filter and fine separator ensure the best compressed air quality. All oil filters and separator components within 22KW (30HP) are centrifugal open close, which further reduces the maintenance time. "Fast maintenance point" enables maintenance work to be completed in a few minutes, reducing downtime and maintenance costs.
Built in intelligent control
In order to reduce the operation cost, precise operation control is essential. All screw compressors of langkun air compressor are equipped with intelligent control system, and its control menu is simple and easy to use.
New air compressor speed regulating filter
It adopts a unique reluctance switch variable speed drive system. The drive system can match the output of the compressor with different demands, thus greatly saving energy consumption. The standard series compressor equipment is equipped with a compressor, so that the output of the whole system can match the demand accurately, and the operation energy consumption of the compressor is appropriate.
Screw air compressor filter equipment - screw air compressor standard series of new products, integrated compressor and dryer series
This new screw air compressor filter series design provides customers with a small, ready to work complete set of products. It has the characteristics of small footprint, easy installation, easy transportation and easy handling, and can pass through the standard size door. Series of compressed air is single connected, and the power connection is also very easy, there is an integrated dryer with energy-saving heat quality unit, this new compressor and dryer unit is the combination of L series rotary screw compressor and refrigeration dryer. The new series is available in 5 models and specifications. The dryer unit is matched with the compressor. The output air can be dried to a constant pressure dew point of 3oc without refrigeration control valve to avoid repeated adjustment. Under the premise of ensuring the air quality and the reliability of the dryer, once the dew point is reached, the dryer unit will be shut down. When supplied, there is a large air filter which is easy to replace. It can be used with the dehumidifier at the inlet to ensure the best performance. It provides a variety of outputs, including 7.5kW, 11kw, 15kw, 18.5kw and 22KW. It can produce gas up to 3.46 m3 / min at 7.5 bar, while the highest equipment is 1450 mm.
Principle editor
(1) Suction process: the motor drives the rotor, and the tooth groove space of the master and slave rotors turns to the inlet end wall opening
When the end face of the intake side of the rotor turns away from the intake port of the shell, the air between the tooth grooves is sealed between the main rotor, the slave rotor and the casing to complete the suction process.
(2) Compression process: at the end of suction, the closed volume formed by the tooth peaks of the main and slave rotors and the casing decreases with the change of the rotor angle, and moves in a spiral shape, which is called "compression process".
(3) Compressed gas and injection process:
In the process of transportation, the volume decreases, the gas is compressed, the pressure increases and the temperature rises. At the same time, the lubrication which becomes foggy due to the pressure difference is sprayed into the compression chamber, so as to achieve the functions of compression, temperature reduction, sealing and lubrication.
(4) Exhaust process:
When the closed tooth peak of the rotor rotates to meet the exhaust port of the casing, the compressed air begins to discharge until the mating surface of the tooth peak and the tooth groove moves to the exhaust end face. At this time, the tooth groove space is zero, that is, the exhaust process is completed. At the same time, another pair of tooth grooves of the main rotor and the slave rotor have been rotated to the inlet end to form the maximum space and start the suction process, thus starting a new compression cycle.
Scan! To view more