The working principle of air compressor pressure switch and
2021-04-09
Working principle of air compressor pressure switch and debugging method
Air compressor pressure switch can regulate air compressor start-stop, recuperated after the pressure inside the storage tanks, let air compressor to rest, to maintain it. Air compressor factory in debugging, can according to the needs of different customers, regulate it to a certain pressure, and then set a duo is poor. Circumstances, when compressor start, for instance, to the inside pressure reached 20 jins, air compressor discharge may stop. When the pressure in the 14 kg, the air compressor to start again, but it will have a pressure difference, and this time you can let it rest.
How to debug air compressor pressure switch?
Pressure bump. With the pressure of screw, 2 to adjust clockwise, make its pressure. On the contrary, the effect of low pressure, the pressure difference between the it still hasn't changed.
With pressure to clockwise adjustment screws into 1, so rise under the effect of it. On the contrary, the effect of pressure drop, clarify its pressure will not change.
Its compressor set pressure may work, release valve and saturation, valve will make steel pipe gas discharged, which belongs to the normal phenomenon, of course, you don't have to worry about.
In adjusting the pressure, don't exceed the pressure of the compressor size, but the proper exhaust is necessary.
LF15 series pressure switch, this product is used to regulate the pressure in the air compressor tank, to make it work between the two preset pressure value. With the unloading valve pressure switch can make the air compressor to prevent overload, attach the handle can be used to manually cut off the power of the compressor. Cross the base interface can make the safety valve and pressure gauge device becomes more simple and easy to form a complete set of parts.
Scan! To view more